Volvo FH540 8x4
FALKOM FAW 25.000 WRECKER
Prijs op aanvraag
![](https://nebimusedtrucks.eu/wp-content/uploads/2023/03/john.jpg)
![](https://nebimusedtrucks.eu/wp-content/uploads/2023/03/Frank-cta.png)
Merk | Volvo |
Opbouw | Bergingswagen |
Kilometerstand | 250 km |
1ste registratie | 04-09-2024 |
Chassisnummer | YV2RT60G9RB453930 |
Brandstof | Diesel |
Vermogen | 405 kW / 551 pk |
Euronorm | Euro 6 |
Transmissie | Automaat |
Aantal versnellingen | 12 |
Cabine | Globetrotter |
Kleur | Geel |
Asconfiguratie | 8x4 |
Laadvermogen | 26.800 kg |
Falkom wrecker installation type FAW 25.000
– One main arm.
– A two-stage hydraulically extendable lift arm, very low; Highest step forearm 195 mm, arm length to center bus frame 4.55 m.
– A fully hydraulic installation consisting of:
– hoses
– couplings
– pipes
– 8-function valve block
– Two double-acting lifting cylinders take care of the up and down movement of the main arm.
– The installation is also executed with a so-called “Powertilt” installation to minimize damage to spoilers e.d.
– The assembly is assembled on a subframe, etc. in accordance with specifications of the truck chassis and sprayed in the primer (RAL 2004).
– 2 anchors model working independently of each other standard.
– A lift beam (100 x 100 mm tube).
– Three sets of fork holders.
– 3 sets of V forks.
– 1 Set of chain forks.
– Set of air suspension forks.
– Tow bar mounted.
– Shovel and broom mounted.
– Oil tank.
– Pulling device with trawler in combination with a semi-trailer link.
– Supported drawbar coupling support.
– Two 24 ton hydraulic winches (Sepson H 200), which are equipped with two speeds and a pneumatic freewheel.
– Hydraulic double pump.
– Radio remote control for all functions, excluding anchor shovels
– Complete installation is stacked / metallized.
– Built according to CE guidelines.
– Assembly of the air hands and electrical connections of the truck at the rear in the body.
– Luxury enclosure in aluminum version highly adapted to the 8×4 chassis incl. fly-over, mounting the standard forks in the enclosure, LED cabinet lighting, installation installation on the chassis.
– LED light bar mounted on the flyer.
– Lighting control switches mounted in the control box and in the cabin.
– LED flash lamps mounted at the rear.
– 6 work lights mounted (under the flyer, high at the rear and low).
– LED lamps mounted on the corners of the enclosure.
– Starting aid 12/24 volts.
– Air reel mounted.
– Spray the installation in finish.
– 7-wire electrical cable reel installed.
– Container for counterweight mounted behind the cab.
– Base plate for lateral stability (standard legs only)
– Bus frame 10.000kg
– 2 fork raisers
– 2 pieces of anchor plates for Wheel chocks
– Two WLL 15 tonne folding discs
– European approved buffer beam at the rear.
– Pulling device with pin 40, 50 and 60 mm
– 2 models towing eyes.
– Ballast under the bumper.