Volvo FH500 8x4 Triple - HMF 5020K6
Lease v.a. € 3.995,-
Prijs op aanvraag
![](https://nebimusedtrucks.eu/wp-content/uploads/2023/03/john.jpg)
![](https://nebimusedtrucks.eu/wp-content/uploads/2023/03/Frank-cta.png)
Merk | Volvo |
Opbouw | Kraanwagen |
Kilometerstand | 100 km |
1ste registratie | 26-07-2024 |
Chassisnummer | YV2RT40G2RB447522 |
Brandstof | Diesel |
Vermogen | 375 kW / 510 pk |
Euronorm | Euro 6 |
Transmissie | Automaat |
Aantal versnellingen | 12 |
Cabine | Laag |
Kleur | Zilver |
Asconfiguratie | 8x4 |
Laadvermogen | 15.580 kg |
Crane:
HMF loader crane:
Type : HMF 5020 K6
Lifting capacity : 43.6 T/M
Swivel range : Continuous
Height folded : 2400 mm
Weight : 5200 kg
Hydraulic range : 16.8 meters
Installation width : 1200 mm
Support leg spread : 7770 mm
-Regeneration system on main boom, articulated boom and extension cylinders for optimum working speed.
-Horizontal hydraulically extendable support leg tubes, operation from radio control. -Pipe and hose routing internal: support leg beams, pillar and main boom (“clean tap”).
– Position load holding valves on cylinders in such a way that the risk of damage with the lifting load is minimal.
-Hard chrome plated piston rods.
-Radio control with display readout, eg: crane-support leg program, lifting capacity crane-jib-winch.
-Various functions from radio control such as, for example, engine start-stop, work lamp, (automatic) hand throttle, etc.
-Radiographic remote control, brand Scanreco. (All crane functions and 8 support leg function)
-Danfoss PVG32 high-proportion valve block, equipped with electromagnets for radio control.
– Remote control with emergency stop, control for engine start/stop, speed control, work lamp, working speed, horn, etc. Also included: battery charger, extra battery and 15 meters of cable for operating the car charger tap in emergency situations.
-HMF Info-Centre, display on radio control with all information regarding lifting capacity crane/ winch/jib and stability.
-HMF RCL 5300 load moment protection system with 90 and 100% signalling, emergency stop operation at every operator position and standard adjustable forward program.
-Flash lamps on support legs.
-CE transport security (width and height security).
– Load hook with safety lock and ball bearings.
-Oil cooler mounted on tap base, built-in return and pressure filter.
-Work lamp, to be operated from the radio control.
-Hydraulic tank mounted on crane base within crane width.
-Support legs hydraulically foldable by means of rack and pinion system (left, right or both sides)
-EVS.
HMF’s patented stability monitoring system works by means of angle monitoring (without support leg sensors).
This system always generates the maximum, safest lifting table in all outrigger positions.
Loading on the vehicle has a stabilizing effect and EVS therefore generates a higher lifting table for the cabin, or is not fully stamped wide on the side.
-Crane is equipped with a jib preparation, both hydraulic and electrical
Open body length 6400
-Length : 6400mm internal
Floor:
-Composed of hardwood floorboards, thickness 28mm
-Provided with steel plate above the wheels
-Equipped with stanchion tubes in the floor
-Included 10 stakes of 600mm
– Equipped with 4 twistlocks plates in the floor (place as far back as possible)
-Provided with 8 * 2 lashing eyes in the side edge
header:
-Composed of steel profiles
-Above this a rack for an equator to be supplied by you. (2 pieces loose supports)
Back Frame:
-Composed of steel profiles
– Equipped with a light box
-Provided with 2 flashes
– Equipped with 2 work lights
Whatsapp Frank: 0031-6-10 91 03 21 Whatsapp John: 0031-6-51 55 56 65
whatsapp-> text only no calling
Merk | HMF |
Locatie | Achter cabine |
Type | 5020 K6 - 43.6 T/M - Radio controle |
Bouwjaar | 2023 |