Description
Range:
HMF charging tap:
Type: HMF 5020 K6
Lifting capacity: 43.6 t/m
Swivel range: Stepless
Folded height: 2400 mm
Weight: 5200 kg
Hydraulic reach: 16.8 metres
Mounting width: 1200 mm
Support leg spread: 7770 mm
-Regeneration system on main boom, articulated arm and extension cylinders for optimum working speed.
-Horizontal hydraulic extendable support leg tubes, control via radio. -Pipe and hose routing internally: support leg tubes, column and main boom ("clean tap").
-Load holding valves on cylinders positioned in such a way as to minimise the risk of damage to the load to be lifted.
-Hard chrome-plated piston rods.
- Radio control with display readout, e.g.: crane-leg programme, lifting capacity crane-boom winch.
- Various radio control functions, e.g. motor start-stop, work light, (automatic) hand throttle function, etc.
- Radio remote control, brand Scanreco. (All crane functions and 8 support leg functions)
- Danfoss PVG32 high-proportional valve block, equipped with electromagnets for radio control.
- Remote control with emergency stop, controls for motor start/stop, speed control, working light, working speed, horn, etc. Also included: battery charger, extra battery and 15-metre cable for operating the truck-mounted crane in emergency situations.
- HMF Info-Centre, display on the radio control with all information on lifting capacity crane/winch/boom and stability.
- HMF RCL 5300 load moment safety system with 90 and 100% signalling, emergency stop control at each operator position and standard adjustable forward programme.
- Flashing lights on the support legs.
- CE transport protection (width and height protection).
- Load hook with safety lock and ball bearings.
- Oil cooler mounted on crane foot, built-in return and pressure filter.
- Working light, operated via radio remote control.
- Hydraulic tank mounted on crane foot within crane width.
- Support legs hydraulically foldable by rack system (left, right or both sides)
- EVS.
HMF's patented stability control system works by means of angle monitoring (without support leg sensors).
This system always generates the maximum, safest lift in all support leg positions.
Loads on the vehicle have a stabilising effect and EVS therefore generates a higher lift table in front of the cabin, or is not fully wide stamped on the side.
- Crane is equipped with boom preparation, both hydraulic and electric
Length open body 6400 mm
- Length: 6400 mm internal
Floor:
- Consisting of hardwood floorboards, thickness 28 mm
- Equipped with steel plate above the wheels
- Fitted with upright tubes in the floor
- Including 10 pegs of 600 mm
- Fitted with 4 twistlocks in the floor (positioned as far back as possible)
- Fitted with 8 * 2 lashing eyes in the side edge
Superstructure:
- Consisting of steel profiles
- Above, a rack for an equaliser to be supplied by you. (2 loose supports)
Rear construction:
- Consisting of steel profiles
- Equipped with a light box
- Equipped with 2 flash units
- Equipped with 2 working lights
